A-SUN Flat Plate Rooftop Electrical Heating Element Solar Water Heater
Feature:
1. Safe and steady
Flat plate solar collector uses all cooper fluid tube, and the components
are not easy to be damaged, so the system operating is steady.
2. Pressurized operating
Working pressure is 0.6Mpa and test pressure is 1.0Mpa. The hot water is
forced to stream out from the top and convenient to use.
3. High heat efficiency
Absorbing coating of the collector is black chrome and blue sputtering. The
absorbing rate is 92-96%, and emission rate is 5%±2%, so heat efficiency is high.
4. Good temperature preservation
The illustration layer is 50mm with constant temperature and high pressure
quantitative foam, and it is less than 5 Celsius Degree per 24.
5.Long using life
Inner tank is 1.2-2.0mm stainless steel that resists high temperature and
corrosion, and keep 15 years using life
Pre-sale:
1.make a report about the products manufacture by pictures and related words,
especially the technique that meet the client’s request.
2.When the client visits our company, we can also write a report to ensure the
production is same as client’s demand.
3.We’ll be responsible for the products loading, and send the clients photos.
After sales:
1.3D installation CD will be provided.
2.Special service for VIP client.
3.Warranty: 3 years for the water tank and 5 years for the vacuum tube.
4.1% vacuum tube for free, screw and silicone ring for free.
- Tel
- *Title
- *Content